Filament PLA Plus ProSpeed from ROSA3D was created for technical applications. Perfect for printing at high speed on industrial printers. While maintaining the ease of printing from PLA, it offers better mechanical and temperature resistance than in the case of PLA Starter material. The impact strength of PLA Plus ProSpeed measured by the Izod method is almost 1.5 times higher than that of standard ABS, and after crystallization - more than twice as high.
The filament is made of a biodegradable biopolymer and is an alternative to styrene-based materials (such as ABS). PLA Plus ProSpeed provides excellent print quality, good adhesion to the heatbed , less warping and no irritating odor.
It was made of ingredients approved for contact with food. For products that come into contact with food, certification is the responsibility of the manufacturer of the final product.
Recommended printing parameters:
- extrusion temperature: 190-230 ° C
- bed temperature: 50-70 ° C
- supply: 50-100%
- printing speed: 60-80 mm / s
Filament can be printed on unheated tables. In the event of adhesion problems, we recommend the use of an adhesive.
PRODUCT PARAMETERS PLA Plus ProSpeed
- Diameter: 1.75 mm
- Net weight: 1000 g
PHYSICAL PARAMETERS OF PLA Plus ProSpeed
- Density: 1.22 g / cm3
- Odor: odorless
- Heat deformation temperature: 75-85 ° C (ASTM E2092)