Heading 1

PLA  (Poly-Lactic-Acid) is a biodegradable polymer with a low melting point.
EverfilTM PLA-N.01 is very easy to print material, offering a nice and  smooth surface finish. When properly cooled, PLA  can work well at higher maximum printing speed, lower layer
heights and also easily print sharp corners.
Combining this with low warping of the print makes it the first choice of most
makers, prosumers and schools.



Filament Nominal Value Unit Test Method
Filament diameter 1,75 , 2,85 mm -
Diameter tolerance +/- 0,03 mm -
Spool weight 1,0 , 3,0 kg netto -


Physical Nominal Value Unit Test Method
Density / Specific Gravity 1,24 g/cc ASTMD792
MFR 6 g/10min ASTMD1238
Relative Viscosity 4,0 ASTMD5225
Clarity Transparent
Peak Melt Temperature 145-160 °C ASTMD3418
Glass Transition Temperature 55-60 °C ASTMD3418


Mechanical Nominal Value Unit Test Method
Tensile Yield Strength 8700 (60) psi (MPa) ASTMD882
Tensile Strength at Break 7700 (53) psi (MPa) ASTMD882
Tensile Modulus 524,000 (3.6) psi (MPa) ASTMD882
Tensile Elongation 6 % ASTMD882
Notched Izod Impact 0.3 (16) ft-lb/in (J/m) ASTMD256
Flexural Strength 12,000 (83) psi (MPa) ASTMD790
Flexural Modulus 555,000 (3.8) psi (MPa) ASTMD790
Heat Distortion Temperature 66 psi (0.45 MPa) °C ASTME2092

PRINT CONDITIONS EverfilTM PLA-N.01 (may be different for different printers)

3D Printers Typical Value Unit
Printing temperature 190 – 210 °C
Bed temperature (if needed) 60 – 70 °C
Cooling (according to design) 30 – 100 %


Filament can't handle moisture very well and that is why we recommend storing your
filament in a cool, dry environment, ideally in a package vacuum sealed with silicate.

Red PLA EverfilTM, 1.75mm, 1kg

£23.00 Regular Price
£18.40Sale Price
VAT Included

UK VAT reg GB360 3680 10

©2018 - 2021 by Blue Box Goblin