The PET-G Standard filament from ROSA3D is characterized by ease of printing comparable to PLA. Dedicated to people who deal with amateur and professional 3D printing. Details made of PET-G Standard are characterized by precise details , good adhesion to the work table, odorless and low level of shrinkage. Prints with PET-G Standard are distinguished by high chemical resistance. They can be sanded, drilled, sawed, grinded, cut and painted without compromising the structural integrity of the element. PET-G Standard filament is made from raw materials that are approved for contact with food, in accordance with European Union regulations and FDA regulations.
Recommended printing temperature 220- 260 ° C.
Recommended table temperature: 60-80 ° C
TECHNICAL PARAMETERS PET-G Standard
- Diameter (mm): 1.75 mm
- Diameter tolerances (mm): +/- 0.05 mm
- Ovality tolerances (mm): +/- 0.02 mm
- Weight (g): 800 g (vacuum packed with moisture absorber)
- Print temperature (° C): 220-260 ° C
- Table temperature (° C): 60-80 ° C
PHYSICAL PARAMETERS PET-G Standard
- Density : 1.29 g / cm3
- Odor : odorless
- Notched Izod impact strength: 4.7 kJ / m2 (ISO 180)
- Tensile elongation (speed 5 mm / min, to break): 5.5% (ISO 527)
- Tensile strength (to break): 47 MPa (ISO 527-2)
- Tensile modulus: 2980 MPa (ISO 527-2)
- Thermal deformation temperature: 78 ° C (ISO 306)