Heading 1

If you not sure yet about Everfil filaments quality and reliability, we give you opportunity to try it.

Pick your sample and order it.
Limited quantities available.
Filament weight approx 50g.
Shipped next working day.

PLA (Poly-Lactic-Acid) is a biodegradable polymer with a low melting point.EverfilTM PLA-N.01 is very easy to print material, offering a nice and smooth surface finish. When properly cooled, PLA can work well at higher maximum printing speed, lower layerheights and also easily print sharp corners.Combining this with low warping of the print makes it the first choice of mostmakers, prosumers and schools.TYPICAL PROPERTY VALUESFilament Nominal Value Unit Test MethodFilament diameter 1,75 , 2,85 mm -Diameter tolerance +/- 0,03 mm -Spool weight 1,0 , 3,0 kg netto -Physical Nominal Value Unit Test MethodDensity / Specific Gravity 1,24 g/cc ASTMD792MFR 6 g/10min ASTMD1238Relative Viscosity 4,0 ASTMD5225Clarity TransparentPeak Melt Temperature 145-160 °C ASTMD3418Glass Transition Temperature 55-60 °C ASTMD3418Mechanical Nominal Value Unit Test MethodTensile Yield Strength 8700 (60) psi (MPa) ASTMD882Tensile Strength at Break 7700 (53) psi (MPa) ASTMD882Tensile Modulus 524,000 (3.6) psi (MPa) ASTMD882Tensile Elongation 6 % ASTMD882Notched Izod Impact 0.3 (16) ft-lb/in (J/m) ASTMD256Flexural Strength 12,000 (83) psi (MPa) ASTMD790Flexural Modulus 555,000 (3.8) psi (MPa) ASTMD790Heat Distortion Temperature 66 psi (0.45 MPa) °C ASTME2092PRINT CONDITIONS EverfilTM PLA-N.01 (may be different for different printers)3D Printers Typical Value UnitPrinting temperature 190 – 210 °CBed temperature (if needed) 60 – 70 °CCooling (according to design) 30 – 100 %STORAGEFilament can't handle moisture very well and that is why we recommend storing yourfilament in a cool, dry environment, ideally in a package vacuum sealed with silicate.

PLA Samples, Everfil

VAT Included

UK VAT reg GB360 3680 10

©2018 - 2021 by Blue Box Goblin